HINDALCO Aluminium Corrugated Sheets | Colour Coated sheets | Sandwich Panel Sheets
Finolex PVC Sheets | Fibreglass Roofing Sheets | G.E. / Tufflite Polycarbonate Roofing Sheets
RAMCO Asbestos Roofing Sheets | Roof Ventilator | Garware Nylon Ropes and Slings | Roof Water System
Plastic Water Tanks | PVC Doors for Bathrooms | FRP Wrinkle Sheets and Decorative Panels | TATA Shaktee CG Sheet | Other Products
 
     
    » P R O D U C T S  
  Back  
Colour Coated Sheets » Colour Coated Roofing Sheets
   
 
metacolor colour coated sheets

Colour Coated Roofing Sheets trapezoidal profiles are used for widely diverse applications. Thanks to their large range of geometric designs, they offer variety of architectural possibilities. Colour Coated Roofing Sheets trapezoidal profiles are supplied not only in different sections and thickness but also in various heights and required dimensions. They are suitable for use as Roof and Wall Panels, in single or double shell construction.
 
   
    Colour Coated Roofing Sheets profile 930  
 
schematic profile
» Material: Prepainted Steel
» Coating: Coneiring to JIS 3312
» Colours: As per RAL Colour Chart / Mills Std. Sheets
» Applications: Industrial Roofing, Cladding, Farm Houses, Airport Hangars, Factory Sheds, Warehouses etc.
 
   
   Recommended Thickness  
  · Al-Zn alloy coated steel (550 MPa): 0.50 mm TCT
· Pre - painted galvanized steel (240 MPa): 0.60 mm TCT
· Pre - painted Al-Zn alloy coated steel (550 MPa): 0.50 mm TCT
 
   
   Specification of Roof Sheeting & Cladding  
     
 
1) Base metal CR as per IS - 513 & GI as per IS-277
2) Zinc coating 120/175/220/275-GSM
3) Yield Strength 240 Mpa To 550 Mpa (We can also Supply full hard 340 & 550 Mpa)
4) Top coat 18-20 Micron (We can also supply upto 50 micron) Polyster over 5-7 Micron epoxy Primer as per IS-14246
5) Bottom / Back Coat 5-7 Micron Epoxy Primer (also possible 20 Micron) Standard Mill Back Coat
6) Colour Shade offwhite (Ral-9002) Blue-5012 or any standard colour available as per standard Ral code
7) Size in MM 0.30 to 1.40 mm TCT (Total Coated Thickness)
8) Paint Finish 30% Gloss / Semi Gloss
9) High-Rib Profile Cover width 1050 mm (930 Cover) 1070 mm (1050 Cover)
 
  Note: *Above coated products are available in high Tensile Steel as per ASTM A946 Gr. E.  
   
Copyright 2009 by Mamata Group. Best viewed in Netscape Navigator 4.0 and above and I.E. 5.0 and above at 800 x 600.
Website design by Ojaswi Tech