 |
Joint Bracket
To connect two lengths of roof water
|
 |
Running Outlet
To provide an outlet for water anywhere along the length of roof water pipe line which is connected to the down line pipe.
|
 |
90° Elbow (without outlet)
To change the direction of roof water pipe line through 90°, normally at the corners. |
 |
90° Elbow (with outlet)
To change the direction of roof water pipe line through 90°, and also provide an outlet for water which is connected with down line pipe. |
 |
Short Stop End
To close the end of the roof water pipe line and also provide an outlet for water, which is connected to the down line pipe. |
 |
Support Bracket
To support pipes and fittings wherever necessary and strengthen the roof water pipe line. |
 |
Top Bracket
To locate the support bracket and rafter bracket together and ensure proper connection between them. |
 |
Single socket Elbow
(75, 110 & 160 mm)
To join the roof water outlet with down line pipe
|
 |
Clamp
To ensure perfect fixing between pipe and fittings. |
 |
Pipe Clip (75, 110 & 160 mm)
To provide support and ensure proper fixing of down line pipe on the wall. |
 |
Roof Water Pipes
To collect the water from the roof and convey to the down line pipes. Available in 3 m length. |
 |
Down Line Pipe
(75, 110 & 160 mm)
To convey the water collected in roof water pipe line to ground level. Available in 3 mt length with one end socketed. |
 |
Rafter Brackets (Top / Side)
To support the complete roof water pipe line with rafters. Available for top and side supports. |
 |
Rubber Gasket
To provide leak proof joints. |
 |
Rubber Seals
To ensure leakproof joint of single socket elbow. |